黄土洞室掘进深度与围岩位移变化规律研究     

时卫民  王鹏  赵尚毅 《岩土工程技术》2020,(2):70-75

应用PLAXIS 2D/3D有限元分析软件,对某黄土洞室进行了二维、三维分步掘进、三维一次掘进等工况的弹塑性有限元分析,研究分析了不同工况下洞室围岩位移的变化规律,并对掌子面的空间效应进行了分析。分析结果表明,二维与三维分步计算的最终位移基本一致,可以用二维的计算结果来估算洞室开挖的最终位移。三维分步掘进的分析表明,不同埋深的洞室其位移比的变化规律基本一致,当L/B<1时(L为掘进深度,B为洞室跨度),位移比呈线性增加;当L/B>1时,位移比呈非线性增加;当L/B>3时,其最大位移接近最终位移。掌子面的空间效应分析表明,在掌子面处的位移约为最终位移的1/3,距掌子面0.5倍跨度处的位移约为最终位移的2/3,距掌子面2.5倍跨度处的位移基本达到了最终位移。  相似文献   

A 2D discrete heat transfer model considering the thermal resistance effect of fractures for simulating the thermal cracking of brittle materials     

Yan  Chengzeng  Jiao  Yu-Yong 《Acta Geotechnica》2020,15(5):1303-1319

Acta Geotechnica - A concise, two-dimensional discrete heat transfer model is presented, which considers the thermal resistance effects of cracks. The discrete heat transfer model discretizes the...  相似文献   

Orbital control on cyclical organic matter accumulation in Early Silurian Longmaxi Formation shales     

Siding Jin  Hucheng Deng  Xing Zhu  Yan Liu  Sibing Liu  Meiyan Fu 《地学前缘(英文版)》2020,(2):533-545

High resolution(939 samples)total organic carbon content(TOC)analyses were conducted on the Shuanghe Section of^152.6 m in the Changning area,Sichuan Basin.The sampling section was divided into two units considering the distinct-different deposit environment and sediments accumulation rate.The lower part(Unit 1)and the peer part(Unit 2)with high resolution sample spacing(0.08–0.4 m)enables the identification of the precession cycle in two sedimentary sequences with distinct different sedimentary accumulation rate.MTM Power spectral analyses on untuned TOC series reveals significant peaks exceeding above the 95%confidence level and shows that both Unit 1 and Unit 2 have recorded Milankovitch cycles of 405 kyr long eccentricity,short eccentricity,obliquity and precession.The floating astronomical time scale(ATS)was constructed on the Shuanghe Section in the Early Silurian(~439.673–444.681 Ma),and which was calibrated by 405 kyr long eccentricity cycles.The total duration of the Wufeng and Longmaxi shales is 5.01 Myr.The floating ATS used for estimating the duration of the graptolite zones and each stage in the study interval.Finally,we postulated two models that could verify the linkage between orbital cycle and organic accumulation.To make sure whether productivity or preservation is the main factor that under long eccentricity control,the phase correlation between the obtained filtered signal and the theoretical orbital solution should be made clear in the further research.  相似文献   

Trends and risk evolution of drought disasters in Tibet Region,China     

Chen  Qiong  Liu  Fenggui  Chen  Ruijie  Zhao  Zhilong  Zhang  Yili  Cui  Peng  Zheng  Du 《地理学报(英文版)》2019,29(11):1859-1875

Journal of Geographical Sciences - The risk posed by natural disasters can be largely reflected by hazard and vulnerability. The analysis of long-term hazard series can reveal the mechanisms by...  相似文献   

不同结构林带防风效能风洞模拟     

李晓烨  王克俭  谷建才  刘启国  崔严 《中国沙漠》2019,39(6):118-125

防风林带结构是影响防风效能的主要因素。建立不同宽度、不同株行距林带防风效能与林带后距离之间的统计模型，可以为防风林建设提供指导性意见。通过风洞实验，在11 m·s^-1风速下，对4种宽度、5种株行距林带的背风面0~10H（H为林带高度）的风速进行测定，采用曲线参数估计法、傅立叶模型、SSF模型（Sum of Sin Functions），构建了不同结构林带防风效能与林带后距离间的统计模型。结果表明：傅立叶模型拟合不同宽度林带的防风效能与林带后距离的关系效果最优，可决系数（R²）均在98%以上；SSF模型拟合不同株行距林带的防风效能与林带后距离的关系效果最优（R²>0.98）。根据构建的统计模型，风速为11 m·s^-1左右时，林带宽度8 m（两行一带）的防风林的防风效能存在明显优势；5种株行距的林带中，株行距为8 m×8 m的防风林带本试验条件下防风效果最好。  相似文献   

云南墨江金厂矿床金镍赋存状态及成因关系探讨     

周凯  张洪瑞  柴鹏  张慧超  程先锋  杨澍 《矿床地质》2020,39(1):97-110

墨江金厂金镍矿床位于哀牢山造山带中段,九甲—安定大断裂上盘,是西南三江成矿带内一个独特的金镍矿床。本文在详细野外地质调查基础上,通过显微镜下观察、扫描电镜和能谱分析,结合矿石微量元素分析,对矿石中金、镍赋存状态及成因关系进行了研究。结果显示,金赋存形式主要有可见金和不可见金。可见金又可分为粒间金和包体金;不可见金是以Au~+赋存于硫锑铜银矿、黄铁矿中。镍赋存状态有两种:一是以独立矿物,如辉砷镍矿、锑硫镍矿等存在;二是以离子态赋存于黄铁矿、硫锑铜银矿中。矿石结构构造、矿物共生组合及微量元素含量等显示,金和镍为同期热液成矿,金来自岩浆热液系统远端的低温热液,镍是含金低温热液流经超基性岩体时萃取而来。成矿过程可分为早期富硅质热液和晚期富钙质热液两个阶段,成矿是在幕式构造活动下多期流体运移和沉淀的结果。  相似文献   

Analog simulation of urban construction land supply and demand in Chang-Zhu-Tan Urban Agglomeration based on land intensive use     

Xiong  Ying  Chen  Yun  Peng  Fen  Li  Jingzhi  Yan  Xiaojing 《地理学报(英文版)》2019,29(8):1346-1362

Journal of Geographical Sciences - Urban land intensive use is an important indicator in harmonizing the relationship between land supply and demand. The system dynamics (SD) can be used to...  相似文献   

13世纪以来中国海洋盐业动态演变及驱动因素     

鲍俊林  高抒 《地理科学》2019,39(4):596-605

海洋盐业是中国海洋经济的重要部分,也是沿海传统产业之一,13世纪以来不断发展演变。将沿海分为北、东、南3个地带,搜集整理与海盐经济相关的多种历史文献及方志资料,运用地理学方法分析评估了海洋盐业百年尺度的动态演化过程,并比较了资源环境与管理政策的驱动作用及其差异。研究表明：① 沿海盐业表现为传统煎法长期主导、逐步废煎改晒的过程,不同盐区的演化进程存在显著差异,北部盐区最快,东部次之,南部整体发展缓慢;② 海盐生产重心长期位于东部的两淮盐区,19世纪后期向北部盐区快速迁移;③ 资源环境与生态差异促进了各岸段海盐生产演化分异,垄断性管理政策迟滞了海洋盐业的空间集聚进程,未来沿海开发与海洋盐业的可持续发展将主要依靠基于资源生态约束的管理政策与技术。  相似文献   

车辆碾压作用下戈壁地表起尘浓度   总被引：1，自引：1，他引：0  

孟小楠  严平  王振亭  董苗  王勇 《中国沙漠》2019,39(1):80-87

通过野外观测车辆碾压作用下戈壁地表PM₁₀释放浓度，探讨其主要影响因素。针对戈壁区砾石、砂砾、砂质和砂土4种路面类型，应用TSI粉尘仪多次重复观测车辆碾压产生的PM₁₀浓度，进而阐明碾压次数、车速和地表水分等因素对起尘浓度的影响。结果表明：4种路面的平均起尘浓度依次为5.339、9.089、16.944、50.251 mg·m^-3，是自然状态下的5~50倍；起尘浓度随碾压次数增多而增大，其中砂土路情况下的增长最显著；随土层厚度的增大呈现出幂函数的增长趋势；降雨后路面起尘浓度显著减小，且降雨量会影响降雨后起尘浓度的变化趋势。最后提出了针对性的建议和措施以减弱车辆碾压导致的戈壁地表起尘。  相似文献   

Fully coupled hydraulic fracture simulation using the improved element partition method     

Shujun Peng  Zhennan Zhang  Jianye Mou  Bing Zhao  Zhiyuan Liu  Jiading Wang 《国际地质力学数值与分析法杂志》2019,43(1):441-460

The improved element partition method (IEPM) is a newly developed fracture simulation approach. IEPM allows a fracture to run across an element without introducing extra degrees of freedom. It can also simulate any number of fractures in a prescribed mesh without remeshing. In this study, the IEPM is extended to hydraulic fracture simulation. First, the seepage and volumetric storage matrix of a cracked element are derived using virtual nodes (the intersection points of a crack with element edges). Subsequently, the fully coupled hydromechanical equation is derived for this cracked element. To eliminate the extra degrees of freedom (virtual nodal quantities), the water pressure and displacement of the virtual nodes are associated with their adjacent nodes through least squares interpolation. Finally, the fully coupled equation in terms of nodal quantities is obtained. The verification cases validate the method. By using this method, the field-scale hydraulic fracturing process is well simulated. The proposed approach is simple and efficient for field-scale hydraulic fracture simulation.  相似文献